There is a fairly common error in the game "Stalker: Call of Pripyat". The error itself is that the game crashes and the “X Ray engine. A crash has been detected by BugTrap." In this article you will learn why this error occurs and how to deal with it.
Xray engine error in the game "Stalker"
Xray engine, what is it?
Xray engine is a bug nicknamed the bug of misfortune; the bug itself gets its name because of the drawn beetle that appears next to the description of the bug. The bug is that after starting the game you are thrown to the desktop for no reason, after which you see a window describing the problem.
Why does this bug appear? A very large number of people who played stalker tried to figure this out, and for more than one month. Unfortunately, the developers themselves special attention they didn’t pay much attention to this problem, at first they simply ignored it, but after they learned that the problem was occurring among quite a large part of the audience, they released a couple of updates. The updates themselves helped solve the problem with the game crashing, but only for a certain part of the audience; a large number of the audience was still left with this bug and the developers were unable to release the final patch with its solution, although they helped the majority of players.
It is worth noting that a large number of players claimed that the problem lies in old video card drivers. If these drivers have been updated, then the problem went away and the game no longer crashed, but, unfortunately, this method of solving the problem did not help all players. So how to solve this problem? Below are the instructions.
Fix bug “Bug of misfortune”
Other Possible Causes
If you are unlucky and none of the solutions to the problem helped, then you can find this solution in changing the swap file. We struggled with the bug for a long time, but this particular solution to the problem was found not so long ago.
The problem is that players have a small page file, but what is it? The page file creates a so-called virtual memory with RAM, making your computer run a little faster. To solve the bug via the page file, you need to change it, doubling the amount of RAM. How to do this?
To begin, you must right-click on the “My Computer” icon, and then select its properties. In the properties you can find a tab with virtual memory, in which, in fact, you can increase it. you significantly reduce the risk of departure After these steps, most likely, you will even be able to eradicate this problem from your computer forever.
Conclusion
We have looked at all possible ways to solve this bug, as well as described in detail what needs to be done to solve the problem. It’s worth briefly writing down all the solutions to the problem, here they are:
- Availability of patches. Make sure you have the latest patch.
- Purchasing a license.
- Cheats that make the game unstable, thereby allowing a bug to appear.
- Fashion.
- Permission.
- Swap File
We hope this article helped you and you can play into stalker without any problems.
A large number of users of Microsoft products report losing activation of Windows 10 and turning the Pro version into Home. Users receive a notification about an expired key, and when trying to reactivate they receive error 0x803fa067 for Windows 10. How to fix problems and start the system - more on that later in the article.
Causes of failures
Microsoft, under standard conditions, offers the entry of activation keys to confirm authenticity, as well as the correct use of the installed version of Windows.
Activation error 0x803fa067 Windows 10
Error 0x803fa067 when activating Windows 10 can occur for several reasons:
Interesting to know! The company has officially admitted that there is a problem with the activation server for Pro versions (0x803fa067) for . Complaints came from users from all over the world: Korea, Japan and residents of other countries.
Using the Error Troubleshooter
The troubleshooting function is only available if a copy of Windows 10 (version 1607 and higher) has not yet been activated. This service will allow you to resolve existing activation problems. To use the functionality, the user must be an administrator.
Running troubleshooting or re-entering the license key will reactivate the system To run the troubleshooter, follow these steps:
- Click on the "Start" button.
- Go to the "Options" section.
- Next, select “Updates and Security”.
- And select the “Activation” item.
- Then click on the “Troubleshooting” line.
If the service is unable to cope with the error, you can try to fix it yourself or contact technical support for help.
Windows 10 activation Important! If error 0x803fa067 occurs when installing Windows 10, you may need confirmation of the legal purchase of the product: scans of purchase receipts, stickers and copies of letters indicating correspondence with electronic distribution stores.
Microsoft reports that error code 0x803fa067 when activating Windows 10 may be due to the fact that the latest version was not installed at the time of the free update.
Solution to error 0x803fa067 when activating Windows 10
An Internet connection is required to activate Windows 10. To diagnose and know how to fix error 0x803fa067 in Windows 10, you should follow a series of sequential steps:
If the above steps do not help, contact
X-Ray Engine is a programming language created by GSC Game World for internal use. Everyone who played the computer game Stalker has heard about this company. The official SDK (Software Development Kit) engine and source code for the game's programming language are used by the creators of unofficial mods.
In the process of creating Stalker - Shadow of Chernobyl, the developers used X-Ray, and also released two versions of the game that continued the original: Clear Sky and Call of Pripyat. A modified version of the “engine” was used to create the Stalker 2 project, but development stopped back in 2011.
Purpose
Game developers use the X-Ray Engine to create new mods. Stalker is a multi-part game for which a lot of modifications have been released. GSC Game World has created SDK tools to help mod developers. Many mods have been released for each part of the game with different graphics quality and changes.The creators of the unique engine forgot to “certify” it with official documents. The first mod developers created them in a half-baked form. During the development of the first mods and the writing of this review, there were many instructions and thematic forums. Thanks to these instructions, people communicate and share their experiences with the SDK.
Specifications
The final version of the engine runs on the DirectX 11 diagnostic tool and library. The programming language has support for volumetric lighting and complex smoke effects, and it also allows you to render complex game scenes and works with Ragdoll physics.In the first version of the programming language, the developers added soft shadows to the game. When the first part of the game was released, such a graphic element was something new and technically interesting, especially for a game with a large space and an open area.
Key Features
- official SDK for creators of modified maps for the game;
- The programming language supports DirectX 11 libraries;
- creation of physics with realistic movement and its own AI system (A-Life);
- introduction of technology that creates relief textures of objects;
- support for soft shadows and volumetric light;
- display of about four million polygons in one frame;
- The game's programming language is not certified and is not officially distributed;
- rendering of complex game scenes and support for new generation physics.
Games on the computer are a great way to “kill time”, have fun and just relax. Even without being an avid gamer, a person often has his own preferences in the field of game development. Some people love shooters, others can't live without strategies.
Back in 2006, a real event was the release of STALKER: Shadow of Chernobyl. The game has gained millions of fans around the world. The latest version, Call of Pripyat, was released in 2009, after which the number of fans of the game increased sharply: the atmosphere of the Chernobyl nuclear power plant is so captivating that even adults can sit for hours at it.
Unfortunately, many users are complaining that the XRay Engine bug is preventing them from enjoying the game at all. What causes its appearance and how to get rid of it? This is exactly what our article is dedicated to.
What is XRay?
In order to find out how to solve the problem, you need to understand its root cause in more detail. Let's start with the fact that XRay is a game engine that is used in all parts of Stalker.
It was created specifically for this game, and this happened back in 2001. Since the STALKER project itself turned out to be simply an epic “long-term construction”, it saw the light of day only five years later. At first, the developers intended to use it exclusively with DirectX 8, but by the time the first part of the trilogy was released, they added support for DirectX 9. In 2008, when the release of the long-suffering Clear Sky was announced, version 10 was also added there.
Finally, “Call of Pripyat” also received DirectX 11. However, given some “roughness” in the game code itself, the engine was unable to fully unleash the full potential of the 11th version.
What is the manifestation of the error?
This moment cannot be confused with anything. The game suddenly stops and then crashes to the desktop. Since the dialog box describing the error code depicts a large beetle, the XRay Engine is often called a “green disaster” and a “misfortune beetle” on fan forums.
However, enough lyricism. What is the reason for the appearance of the “beetle”?
Reasons for appearance
Alas, there is simply no clear answer to such a burning question. The developers from GSC did not particularly comment on the reasons even at the time when the company still existed, and now it is completely pointless to hope for detailed answers.
Using the trial and error method, it was found that the game most often crashes on the computers of those users who do not have the latest drivers installed for their video card. So if you don't know which version of this software is installed on your machine, it's time to update it.
We update the game itself
If you witnessed the appearance of Clear Sky, then you remember very well all those “flattering” epithets that players awarded the developers. And there was a reason for it! It was, in fact, completely impossible to play, and the XRay Engine error was still minor!
Just look at the immortal snipers and the completely empty “Dark Valley”! I was able to play normally only with add-on 1.5.04, and all the saves that were made on previous versions did not work. In short, if you have the Internet, don’t be lazy and go to the developer’s website. All existing patches for all games in the series are there, so you just need to download and install them. In this case, the XRay Engine error in Stalker will probably appear much less frequently.
Pirate versions
Since the developers did not take into account the interests of end users, the game is protected from illegal copying by the well-known StarForce system. It is not surprising that many users prefer to download NoDVD even in cases where they have a licensed disc with the game in their hands.
Unfortunately, many of these “pills” cause the XRay Engine error to appear. What to do if you don’t want to spoil the StarForce operating system, but you also don’t want to see the “green bug” all the time?
Alas, there is only one way out. Buy the game on Steam. Since in this digital content store the game is also available to foreign users (where StarForce is prohibited in principle), you will definitely get rid of the problem.
Other reasons
Another important factor that may contribute to the error may be your computer hardware. Too new or old components may well not get along with the mysterious Ukrainian engine, after which you will constantly be haunted by the XRay Engine error. “Call of Pripyat” is currently the “freshest” version of the game, which has the least common hardware problems. “Shadow of Chernobyl” and “Clear Sky” are much older in this regard, and therefore they often completely refuse to be friends with new video cards.
Mods
When “Stalker” was just released, the players’ delight knew no bounds. The game really gave a feeling of almost limitless freedom. The GG could go anywhere, being practically unlimited in the direction of his movement. As time passed, the enthusiasm became less and less.
It became clear that the developers were not going to return the cut locations, and there wasn’t enough action in the game. It was then that MODs (game modifications) appeared, sometimes making truly global changes to Stalker.
The most famous was the AMK project, without which gamers with experience now do not recommend completing “Shadow of Chernobyl”. Some mods were very successful, some not so much. But almost all of them have an XRay Engine error. “Call of Pripyat” is much less susceptible to this phenomenon for the reason that there are much fewer mods for this game.
So if you are using a MOD, then there is only one way out - to communicate with its developer directly or to sift through hundreds of pages of forums, where players sometimes post good homemade “patches” that, under certain conditions, can actually eliminate this error. Of course, you can’t always hope for this, since in the case of the XRay Engine (“Call of Pripyat” in particular), it’s difficult to say anything concrete.
Cheats
Other players, who find some levels too difficult, often get too carried away with cheats, with the help of which they can build for themselves an unlimited number of weapons and equipment, and get the best artifacts at their disposal.
As usual, you have to pay for everything. In this particular case, this is expressed in a loss of program stability, when the XRay Engine error in Stalker begins to appear every few seconds. If this happens, simply try looking for a different version of the cheat. Fortunately, today they can be found in thousands of copies on the Internet. Finally, try to pass the difficult level honestly! Perhaps this way you will get much more pleasure from the game.
"Shamanism"
Alas, even the most logical and correct, at first glance, methods fail when it comes to this game engine. For example, if you are not playing with a “native” resolution, this may well be the reason for this error.
Your monitor resolution is 1280x1024, but do you prefer to play at 800x600? It is likely that the XRay Engine appears in Stalker precisely because of this. Change the resolution to the native one (recommended for this monitor). In some cases, such a simple measure helps to completely eliminate the error.
Sometimes the problem occurs when your page file is set to too small. Ideally, its size should be twice the amount of RAM.
How to increase the size of the swap file?
It's actually quite easy to do. To do this, right-click on “My Computer”, and then select “Properties” from the context menu. In the dialog box that opens, select the “Advanced system settings” option. Click on the “Options” button in the “Performance” item, and then select the “Advanced” tab. Then you need to click “Change” in the “Virtual memory” item, then enter the value you require there and left-click on “OK”.
Occasionally, the game can be launched if the system has less than 512 MB of memory, but you shouldn’t do this: the XRay Engine error and terrible “brakes” will still not let you play.
Finally, we need to talk about the features of the game itself. It is advisable to disable unnecessary image enhancement options. This statement is especially true when it comes to “Stalker Call of Pripyat”. XRay Engine appeared very often in version 1.6.0 when the player tried to set the maximum quality settings.
And more about drivers. It is not so rare that an error plagues those users whose computers have a discrete audio card. Try updating the drivers for it, and in particularly difficult cases, disable the device from the Control Panel. Attention! Do this carefully, as otherwise you may lose all sound on your computer.
What can we say at the end of our entire story? We wish you that no errors prevent you from setting new game records! We hope that our recommendations will help you in this matter.
Today we will look at the most common problems associated with the game, which has become the largest brainchild of the Ukrainian studio GСС Game World, namely S.T.A.L.K.E.R.: Call of Pripyat. This first-person shooter was introduced back in 2009, but is still popular today. Oddly enough, many players have various questions about the stability of the game, since it can often crash or freeze.
Before you start fixing bugs, check whether your computer meets the minimum technical parameters:
- Processor – Intel Pentium 4 2.0 GHz / AMD XP 2200+
- RAM – 512+ MB
- Video card - 128 MB video memory and Direct3D 8.0 support
Updating the XRay game engine
If the game crashes due to any XRay Engine errors, then an update to the game engine version is required. At the moment, the most current patch is version 1.6.2, which you can download from the link https://www.playground.ru/files/patch_s_t_a_l_k_e_r_zov_pripyati_v1_6_01_1_6_02-27504/. It's also worth noting that this update fixes crashes after playing for a long time in single player mode. 90% of crashes and freezes are fixed by this patch. Forward!
Removing mods and add-ons
It often happens that after installing one or more mods, Stalker begins to stutter or even crash during the game. When there are several mods, it is most likely due to their conflict. Solution: remove the mods one by one and check if the crashes have disappeared. Even if you only have one mod, you will have to remove it, since it could have some damaged files or a lack of them, which is why you started experiencing crashes and freezes.
Stalker: Call of Pripyat crashes when moving between locations
All you need to fix this unpleasant bug is to install the Sigerous Mod 1.7. As its developers assure, it fixes ALL bugs and after installation you will forever forget what it’s like when Stalker freezes or crashes. How to install it:
- Download from the link https://depositfiles.com/files/yz4rn9sov
- Open the game folder
- In the root of this folder we find and delete gamedata
- Launch the installer
- We wait for the installation to complete and restart the computer
This has helped many, as evidenced by reviews on forums and fan sites. After installation, you can write in the comments whether it helped or not.
Install the MISERY 2.0 add-on
The MISERY 2.0 mod for Stalker: Call of Pripyat brought a lot of interesting innovations, including more than 200 guns, 80 of which are completely new. It would seem, why do I need all this, because I just want to play! The bottom line is that the developers of this add-on have fixed many bugs and errors that could cause problems with the game. What we do:
- Download Misery 2.0 from the link https://yadi.sk/d/Nq7fIhF07US28
- Open the archive and unpack it
- Run the file MISERY2.0 setup.exe
- Waiting for the installation to finish
After the installation is complete, you will need to run the game through the Stalker-COP.exe file, and be sure to run it as an administrator.
That's all, we looked at the main critical errors that cause STALKER: Call of Pripyat to crash. For all other questions you can ask in the comments.
Instructional video
