Pneumatic cylinders from LLC "TD" Hydroproject "are made with a piston diameter from 32 to 320 mm and up to 3000 mm. According to the type of execution, it is made with one, twostems. Pneumatic cylinders can be like a two-way,so one-sided action.
Cylinders comply with ISO 6431 (VDMA 24562, CNOMO / AFNOR 49003).
These cylinders are interchangeable with products of other manufacturers, which allows them to use them on a different equipment. All cylinders are equipped with an front and rear damper and magnetic ring in the piston. It is possible to execute the internal thread on the stock. The rod is made of steel C43 with subsequent chrome. On request, it is possible to supply cylinders without a damper, a magnetic ring and with stainless steel stem.
Checkout
Technical specifications
|
Diameter, mm. |
32; 40; 50; 63; 80; 100; 125; 160; 200 |
|
Workspace |
Prepared air |
|
Working pressure, MPa |
|
|
Maximum pressure, MPa |
|
|
Working temperature |
0-70ºС, perhaps execution with working temperature 90ºС |
|
Working speed, mm / s |
|
|
Type of braking |
Air, adjustable |
|
Brake path, mm |
20 (for diameter 32,40,50,63); 26 (for 80,100,125,160); 45 (for 200) |
Standard piston moves
|
Ø, mm. |
Piston stroke, mm |
|||||||||||||||||||
An example of a pneumatic cylinder designation
Pneumatic cylinder 100 * 150 (pneumatic cylinder with a piston diameter of 100 mm and a piston move 150 mm)
Overall and connecting sizes of the pneumatic cylinder
Possible fasteners of the cylinder
Our company for about 20 years manufactures and supplies hydraulic industrial equipment of the PNEVMOLUX brand. Having accumulated a wealth of experience in this area. We have the opportunity to develop and supply a comprehensive automation system based on pneumatic elements. Our products are applied in a wide variety of industries!
Pneumatic devices such as: pneumatic cylinder, pneumatic distributor, pressure regulator, fast exhaust valve or a pneumatic grinding machine, can be used in both garage workshops and machine-building, metallurgical enterprises. In terms of this, the pneumatics is indispensable in petroleum, gas, petrochemical, refineries, mining, chemical industries, at the enterprises of the construction complex, as well as in the food area. The advantages of using pneumatic equipment in a variety of production areas are associated with gas properties (air), namely: low density, compressibility, availability, low cost, environmental friendliness, fire safety, explosion safety, chemical and radiation resistance.
Pneumatic units are simple in the device, so they have high reliability, speed and specific power. Pneumatic equipment is designed to work in a wide range of temperatures, with high aggressiveness and pollution of the medium, withstands strong shock and vibratory loads.
Aluminum, steel pipes and pnevmolux rods
Aluminum, steel pipes and rods are chromed are used to produce various products, such as various modifications, as well as such equipment as jacks and other engineering sites. We process and supply pipes and rods by customer parameters, in as soon as possible.
Industrial components Pnevmolux
In this section, you will find various industrial equipment necessary in many industrial areas. Such as antistatic equipment (rakes, pistols), allowing to neutralize a static charge on surfaces, hydraulic velocity controllers used as a shock absorber (buffer) in production automation systems and much more.
Pnevmolux hydraulic equipment
Our company has been engaged in the production and supply of hydraulic industrial equipment for over 15 years, during which its technical component is constantly upgraded. We regularly extend our range, thanks to this and our highly qualified engineers, ready to design the hydraulic techniques you need, taking into account all the nuances, we have the opportunity to make equipment, ready to fulfill its functions.
Such equipment as well as equipped with the necessary valves and is able to produce greater effort and power at small sizes. executive mechanismsThis is significantly simplified by the layout and placement of the hydraulic system in the enterprise. Also of the advantages, it is worth noting a high response rate (overclocking and braking).
Aspirational installations Pnevmolux
The aspirational plants we presented are designed to filter air and can be used in various fields of industry, such as metalworking, steel, woodworking, cement, painting, food, and actually any enterprise with which emissions - dust, aerosols, gases and aerosuses are formed.
Exhaust installations are equipped with a pulse type cleaner, which allows you to implement the function of automatic filter cleaning. Through equal intervals, the pulse controller supplies a signal to supply compressed air to the filtering elements, due to which dust and dirt are satisted into a special container, leaving the filter as clean as possible.
Pnevmolux actuators and electric cylinders
Linear actuators and electric cylinders are a device that allows you to make a linear movement with a certain speed, effort and accuracy.
With the help of electric cylinders and actuators ceases to be a relevant problem with a compressor or hydraulic station, no oil - no dirt!
Linear actuators consist of an electric motor and a mechanism that ensures the transmission of the rotation of the motor shaft, on the rotation of the screw pair, then with the help of a telescopic rod, the rod itself makes the forward movement.
Electrojection is a fast and powerful rod drive. In essence, the principle of its work is the same as the conventional linear actuator, but it is designed for higher loads and cases when accurate positioned linear movement is required. Reinforced design and powerful mechanical transmission Provide a large loading capacity. Transmission with a ball-screw pair makes it possible to quickly move the drive rod, and the transmission with a roller-screw pair provide precision positioning.
Machine snapped Pnevmolux
No enterprise can do without specialized industrial equipment and machines, which in turn can not do without components and equipment that contributes to their proper functioning and practically entering them into the overall production system. We have accumulated extensive experience in using these funds, as they themselves are a manufacturing company, and we have something to offer the market.
Do not be slow, leave an application for "Pneumatic Cylinders of the AF and BF series" from the company "GK Techno, LLC" on our portal Bizorg.
Why "GK Techno, LLC":
- users shopping ground Bizorg have the opportunity to get a package of special services. For example, more favorable prices;
- pay for goods or service you can convenient for you;
- "GK Tehno, LLC" strictly fulfills its duties towards firms and physical persons.
Contact the company already now - you do not need to waste time!
In order to leave an application for "Pneumatic Cylinders of the AF and BF series" contact the company "GK Tehno, LLC" on the contacts specified in the upper right corner. Do not forget to indicate that I found the organization on the site of Bizorg.
For full data on the company, go to the upper right corner of the page on the link with the name of the company. After that, go to your interest tab with information.
If you have problems with cooperation with "GK Tehno, LLC" - inform the identifiers of the company (40390) and goods / services (13025485) to our technical support service.
Technical information:
- Information appeared on the site 12/16/2016;
- last minute change - 12/16/2016;
- 19 - This is exactly what the number of visitors drew attention to this page from the moment of placement. And every day this number is growing;
- you can watch "Pneumatic cylinders of the AF and BF series" in the sections "Industrial equipment, machines, mechanisms", "Industrial hydraulics and pneumatics", "Pneumatic cylinders", "Pneumatic cylinders".
Pneumatic cylinders Rotating Types of PCVB (single) and PCWSB (dual) are designed to drive cartridges and fixtures that carry out the clamp of blanks on turning, turning and revolving and other machines. The design of the cylinders provides a piston control device and a safety device that ensures the preservation of clamping force in the event of a compressed air supply.
PC
Piston piston piston cylinders are designed to convert the compressed air energy into the reciprocating rod movement. When the compressed air is supplied to one of the cavities of the cylinder and the connection of another cavity with the atmosphere, the piston moves along with the rod, creating a pushing or pulling force. The cylinders are made with braking at the end of the course, with an outer thread at the end of the rod, with pipe cylindrical and conical connecting thread for air supply, without fastening elements, with a standard stroke length from 25 to 1600mm. The elements of the cylinder mounting (paws, flanges, forks, eyelashes, trimps) and rod fastening elements (Work-shaped head, hinge head, coupling, compensator).
Pneumatic cylinders of the AF and BF series
The pneumatic cylinders of the AF and BF series are made with a piston diameter from 32 to 320 mm and up to 3000 mm. By type of execution are made with one, two rods. Pneumatic cylinders of the AF and BF series can be both bilateral and one-way action.
