Update for Navigator Renault Captur. Firmware for Renault. Work algorithm

Comments (0 )

New ones first

Old ones first

First the best

OR LOG IN AS A GUEST

Latest comments on the site

⇒ "It's all rush. The driver must have been in a hurry. left the car on handbrake. Probably there is a platform with a slope. This caused the car to roll. The steering wheel was turned and it turned out that she went along a curved path. For the driver, everything looked like a mystic. Leave for a few seconds and not see your car on the spot, agree that this is a shock. Probably after such an incident, the driver will be very attentive and the tenth will punish him to leave his car in the parking lot on the handbrake. And for viewers, this is of course a cool video to watch the reaction of the driver."
Added - 06/08/2019
⇒ "It was very interesting for me to watch this video, because my dad is also a builder. And since childhood, I went to work with him. He worked not officially, but on orders. I didn't bother him, I just watched carefully. And I don't know why, but I liked it. Everyone even laughed at me for being like a boy. And I didn't care. When I grew up, I wanted to become an architect, but then, somehow, plans in my life changed. The man in the video is just brilliant. He found himself and is doing what he loves, like my dad."
Added - 06/08/2019
⇒ "Well, Petya doesn’t want to go to any:) You are already showing him the door and hinting at cultures, but he doesn’t care. So, as luck would have it, he signs some kind of decrees, distributes general ranks, appoints judges. In general, “you won’t breathe before you die” - this is not about Pyotr Alekseevich :) It will be hard for Zelensky to find a common language with the current deputies of the Verkhovna Rada if he fails to dissolve it. Most likely, it will be necessary to cooperate with the opposition and connect Kolomoisky's connections, otherwise the required number of votes for the adoption of laws will not be found..."
Added - 06/08/2019
⇒ "eu inca nou inteleg cum trebuie de o jucat"
Added - 06/08/2019
⇒ "It looks like the roof was not even fixed. Although this would hardly be allowed. They probably didn't expect strong winds. But those who filmed, apparently expected such an outcome. No wonder the camera was turned on at the right time. The sight is not pleasant, but it is interesting to watch from the outside. It just becomes scary even at the thought that at that time someone could pass by and the roof would simply crush the person. I wonder now what happened next. How was the roof raised? And in general, someone should be held responsible for the incident?"
Added - 06/08/2019

And here is an instruction on how to update and expand native navigation maps FOR FREE! Thanks for this guide as well. msser from drive2.ru

1) Prepare a blank flash drive from 4 GB
2) Download the Igo crack archive from the Yandex disk using the Drueed link
https://yadi.sk/d/UNsgSbiM3CisiE
Thanks to him for RePack (c)
3) Unpack the files from the archive to a blank USB flash drive
Let's say you have a flash drive drive F:
On it, after unpacking, files and folders should turn out:
IGO-hack for705
total_misp_wince
cehack.mscr
MostScript.exe
ULC2_recovery.exe
ULC2_recovery.mscr
mortzip.dll
4) Start the car (Very desirable, because if the GU turns off during copies, then an extra hemorrhagic)
5) Insert the flash drive with the prepared files from step 3.
6) Open My Device on the left in the corner.
7) Open the MD section
8) Open the folder total_misp_wince
9) Open the file cecmd.exe
10) In the left column, open Storage Card4
11) On the right side, open MD
12) Select the NNG folder in the left column
13) After you have the NNG folder highlighted in blue, click File (Top left) and select Copy\Move
14) Click OK, with this action you will copy the Original NNG folder to the USB flash drive. And you will have a copy of the original navigation.
15) After copying has passed, open the NNG folder, then Content, then the MAP folder on the left side (!), Select all files and press File - Delete
16) Be sure to check that the NNG folder has appeared on the right side !!! This action will completely clear your native navigation maps so that there are no jambs in the future. And the copy will remain on the flash drive in the NNG folder.
In the left (!) part of the arrow, open the folder NNG (!)
17) On the right side, open the IGO-hack for705 folder, select all the files and press File-Copy\Move, press the OK button.
A window pops up confirming the replacement of files, click overwrite all.
18) Everyone finished copying the files. We close the cross in the corner of the help, all returning to the desktop. I mute the car.
19) We wait 30-40 seconds and start the engine. Checking navigation.

This is one option, but here is the option with a photo. Further text and photo of the author:

I read it, downloaded all the necessary files and started doing it) In principle, all the links and instructions are on the above link, but it was more convenient for me to do as I used to:

We take a match / stylus / any other device to poke small MediaNav buttons, a flash drive with enough free space (2 GB will be enough, I think) and go to the car.

We insert the flash drive and start the car. It will be sooo sad and annoying if MediaNav turns off at an unnecessary moment)

We go into test mode (how to do it) and enter the commands "0362" and "6971" - exit to the WinCE desktop

Open "My device" in the upper left corner

We leave in "My device" by clicking on the blue arrow back in the top panel (in the photo under No. 2).
Go to our flash drive

Click "Edit" in the top bar and click "Paste" (insert).

We are waiting for the entire folder to be copied.

Everyone has finished copying the files. We close everything with a cross in the corner on the right, returning to the desktop. I mute the car. We go home and sit down at the PC.

We copy the "NNG" folder from the flash drive to our PC to a secluded place and forget about this folder until we decide to return our native navigation to auto.

Next, download the new firmware from the link yadi.sk/d/UNsgSbiM3CisiE
If it doesn't work, try here - yadi.sk/d/5fK1TlHJ3MvTxT
Unpack the files from the archive on the PC to some folder (I'll call it "newNav")
In this folder, files and folders should turn out after unpacking:
IGO-hack for705
total_misp_wince
cehack.mscr
MostScript.exe
ULC2_recovery.exe
ULC2_recovery.mscr
mortzip.dll

Now you need to copy the edited "NNG" folder from the flash drive to the device.

Go to our flash drive
Highlight the "NNG" folder, click "Edit" in the top bar and click "Copy"
Exit to "My device" by clicking on the blue back arrow in the top bar.
Open "Storage Card4"
Click "Edit" in the top bar and click "Paste" (insert). We are waiting for the entire folder to be copied.
Everyone has finished copying the files. We close everything with a cross in the corner on the right, returning to the desktop. I mute the car.
We are waiting for the dashboard to turn off.

Turn on MediaNav and enjoy the updated maps (+ new ones). In the MediaNav menu it looks like this.

New in 2018 among Carmedia devices based on stable 8 nuclear processor Allwinner T8 with a frequency of 1.5 GHz, 32 GB built-in memory and 2 GB operational! Made on a new stable platform, installed a new digital radio and a new Bluetooth module, with IPS 9 inch screen 1024x600.

Head unit RENAULT Kaptur 2016+ on Android 8.1 CARMEDIA KR-9010-T8-at for climate control with navigation(GPS, Glonass), a large touch screen and a speakerphone is fully installed in your car! The adapted interface will allow you to comfortably control the car and various multimedia functions of the device. Talk on the phone without looking up from the road, use navigation with always up-to-date maps, watch movies and listen to your favorite music or radio - now any road will be a joy for you! Set up a mobile office in your car with the latest features Android, millions of apps on PlayMarket and Wi-Fi/3G the Internet. Good sound and the ability to connect almost any external device (digital tuner, headrests, camera, car diagnostics, parking sensors, etc.) For advice and detailed information, please contact our managers.

The radio tape recorder on Android 8.1 CARMEDIA KR-9010-T8-at is installed on cars:

RENAULT Captur 2016+ climate

SYSTEM CAPABILITIES

	Android+ Octa- Core AllWinner T8CPU Powerful 8- nuclear CPU and system Android provide good performance, multitasking, support for most media formats.
	Regular installationpin- to- pin The device connects to the car's factory connectors without interfering with the wiring. At the same time, all regular functions and the guarantee for your car are preserved.
	Convenient and accurate GPS, Glonass navigation The ability to use absolutely any navigation program (Navitel, Yandex.Navigator, Progorod, etc.)
	parking cameras Connect front or rear view cameras for safe car parking.
	Music player Playing music from any media (CD/DVD/SD card/USB/Bluetooth/external hard drive (HDD up to 1000 Gb supported))
	Video Playing video of any format, support for video in Full HD quality.
	Wireless communication with any phone (Hands-free calling, contact synchronization, listening to music)
	Digital Radio Confident reception, easy search, the ability to save and rename any radio station.
	Internet Use the Internet via built-in Wi-Fi or 3G to chat with friends, view traffic, news, social networks, Skype and more.
	Google Play Application store for Android "Play Market". Download and install any applications, games, navigation programs and much more.
	Optional equipment Connect sensors for car diagnostics, tire pressure sensors, digital TV, recorders, headrest monitors, etc.

SPECIFICATIONS

Screen	9" IPS capacitive multi-touch display with a resolution of 1024x600
CPU
RAM	2 GB Ram DDR3
Built-in memory	32 GB EMMC ROM
	GPS and Glonass. Ability to install any navigation software.
Traffic display
Radio	FM Digital NXP 6686 with RDS
	Digital DVB-T2 (option)
DVD drive
Memory card support	Yes. Up to 32Gb FAT,FAT32,NTFS,EXTFAT
	yes, 2 ports
W.I.- FI	Yes (802.11b/g/n)
	Supports. Option
	BC6 Bluetooth multi-channel module. built-in. (Handsfree via built-in or external microphone + listening to music)
Audio inputs	1 linear
Video inputs	1 composite
output power	4 x 50W, TDA 7850
Amplifier signal-to-noise ratio
Audio outputs	4.1 linear
Video outputs	2 x composite
SupportiPod
IR remote support
Working voltage
Steering wheel button support
CANtire	Yes (supports if it is in the car)
Support for tire pressure sensors
Reversing camera support	Yes (with automatic activation)
Button illumination

EQUIPMENT

• stock head unit
• A set of wires for standard connection (power, sound, etc.)
• GPS antenna
• External microphone
• Instruction
• Warranty card

GUARANTEE: 12 months

SpoilerTarget"> Spoiler: original post

In this topic, I propose to cover the question and answers to the MediaNav head unit.

Question
The instruction lists the Driving Eco2 item - I don’t have it, although the equipment is maximum. Who has such an item on the main screen?

After reading the instructions, I see a lot of inconsistencies - as if a different version.

MediaNav Evolution (MNE) ​

Regular head unit, nee LG LAN5200WR2.
Performs the following functions:

• radio reception with RDS text support function;
• control of external connected audio devices;
• using the phone in hands-free mode;
• recognition of voice commands; [Calls Siri on iPhone and seems to work with some Androids]
• navigation;
• traffic information (TMC);
• informing about high-risk areas where you need to be especially careful;
• parking assistance (rear view camera);
• remote engine start programming;
• determining your driving style and providing driving recommendations to optimize fuel consumption.

This thread is about navigating in MNE (for the most part) and everything related to it.

MediaNav Evolution (MNE) update ​

It consists of two parts - updating the firmware of the MNE itself (the entire system is updated, all programs, including the iGO navigation program) and separately updating the navigation content (maps and everything related to them).

SpoilerTarget"> Spoiler: Firmware update

• Firmware update

Firmware exists in the form of an upgrade.lgu file, which must be put on the USB flash drive to the root and inserted into the MNE. The firmware can update both the entire system (Windows CE + iGO), and only part of it, for example, only the cured iGO.

Official firmware :
(they are set only by increasing versions, you can’t put it on yourself either)​

Firmware for forced installation:
Will be installed regardless of the standing version.
To rollback or to put on itself (for example, 8.0.5 over 8.0.5).
The difference from the official one is only in the name (not repackaged)​

Firmware with corrected navigation: ​

1. 6.0.4 entirely
2. 7.0.5 complete + fixed sync_files.ini (see "Content updater")
3. 8.0.5 complete + fixed sync_files.ini (see "Content updater")
4. 9.1.1 complete + corrected sync_files.ini (see "Content updater")
5. 9.1.3 complete + corrected sync_files.ini (see "Content updater")

SpoilerTarget"> Spoiler: Content update

• Content update

The update may be official - during the first three months of use or for money - but the cards are almost a year late, or maybe they are issued only once a year, or not official - with cards from the Internet.

Official update ​

You need to go to http://renault.naviextras.com to download Renault Media Nav Toolbox and install it.

1. Take a flash drive formatted in FAT32. Go to the car and save the information for synchronization (In Navigation Options (second screen)->My Updates->Options->Update) after inserting the USB flash drive.
   • PRACTICAL GUIDE : How to create a "fingerprint" of your device on a USB storage device.
2. Return to the computer, run Renault Media Nav Toolbox, insert the flash drive and follow the prompts, instructions and common sense. As a result, all updates will be on the flash drive.
   • PRACTICAL GUIDE : How to start using Renault Media Nav Toolbox
   • PRACTICAL GUIDE : How to view and select map updates, apps and extra content in Renault Media Nav Toolbox
   • PRACTICAL GUIDE : How to download and install map updates, applications, and extra content to a USB storage device
3. And the last trip to the car - with updates. We launch MNE and insert the USB flash drive, SyncTool starts and carries out the entire update.

Unofficial update ​

Attention: It makes sense to update the content in an abnormal way only when the navigation is corrected (so that it accepts any licenses, not just its own)
It can be done in several ways:

1. Get into Windows and manually update
   1. Download maps, select the ones you need and sort them into folders yourself.
   2. Download from "a and completely replace the NNG folder.
   3. Make a flash drive with a program for updating content from .
2. Similar to the official method, but using the program "a. (see below "Program for updating content")

SpoilerTarget"> Spoiler: TEST MODE (Service menu). Author yosic

So I present to your attention TEST MODE in MediaNav Evolution.
In order to enter TEST MODE, in the "System Version" window, successively click on the places on the screen shown in the picture (circled in red). The sequence of pressing is fundamental and must be strictly observed.

If you clicked everything correctly, then after clicking on the 5th area you will see such a dialog.
In this dialog, you must enter certain codes and press OK to go to any hidden menus.

• List of codes:

1111 Displays version information for all components in the system.
1119 Checks and, if not running, launches \Storage Card\ULC2_Trigger.exe - there is no such file in the system, I don't know why it was done.
0362 (2383 for 9.1.x) Activation of extended codes (APC). This code must be entered once while the head is on and press OK. Then you do not need to enter it before each extended code.

• List of extended codes:

6971 (9065 for 9.1.x) Exit to the WinCE desktop (launching Explorer "a) In 9.1.x, any of the mcmtest * files is required to run (see below)
3740-3749 Codes that start MicomManager configuration. Of these, 4 workers:

3744 Some kind of test It has speed readings.
3745 Radio test
3746 Audio test
3748 Launching the MicomManager configuration screen (this is where you can change ECO, AHA, etc.)
If you simply enter this code, the menu will open with almost all options disabled.
To activate the disabled options, before entering the code, insert a flash drive containing one of the following files (the content is not important, you can just empty it)

mcmtest_activate_4nng.ini - for a safe set of options (there will be activation of ECO and everything else), I recommend it.
mcmtest_activate.ini (mcmtest_activate_4medianav.ini for 9.1.x) - to activate everything you can. But there will be such options that can kill your head, be careful.​

9999 Enables ActiveSync on the internal (located on the board and not soldered) USB port.
4444 Sending something to BlueTooth
4445 Sends something to BlueTooth in the code there is a mention of com.ahamobile.shoutapp.e
4446 Sends something to BlueTooth in the code there is a mention of LL29PAF236
2223 Switches head skin to old MediaNav (simple icons and stuff)
2222 Switch skin back to MediaNav Evolution

Example. How to Exit to WinCE desktop.

1. Enter the code 0362 and click OK
2. Click<- и все стираем
3. Enter 6971 and click OK
4. We are on the desktop.

Example. How to Enter radio test and then Micom config.

1. We go into TEST MODE by clicking on the areas in the system version dialog.
2. Enter the code 0362 and click OK
3. Click<- и все стираем
4. Enter 3745 and click OK.
5. We are in the radio test.
6. We exit the radio test (there is a cross like)
7. We go into TEST MODE by clicking on the areas in the system version dialog.
8. Enter 3748 and click OK. 0362 does not need to be entered a second time until the head is turned off. Entering 0362 again will disable extended codes.
9. We are at Micom config.

I did all this purely out of sports interest and the desire to help people.
All this took me about a week in the evenings.
This all works on absolutely stock firmware without any changes. That is, it should work for everyone. I only tested on 8.0.5. But I think that in other versions it will be the same.
update Checked on 6.0.4 (although a simple file for editing from 8.0.5 did not fit, only a full one), 8.0.5 and 9.1.1 / 9.1.3

I myself have already turned on ECO through all this. Earned without questions.
By the way. They finalized the Micom config menu. Now you can activate the same ECO with one click on the button. On it itself it is written that it is ECO and what its condition is. each press toggles on. off Save changes and exit with the poweroff button on the head itself.

SpoilerTarget"> Spoiler: How to enable TMC (receiving information about traffic jams via RDS)

Do you have another button with an antenna (or cars) on the screen with a map above the button with a house (lower left corner)? If there is, then the plugs are already included. And if there are cars, then they are even accepted - click on it and watch them.

If there is no such button, then you need to enable:
Go to the Service menu (see "TEST MODE (Service menu)") and call (ARC and further 3748) Micom from there (put the file for minor corrections).

Happened? In Micom, press Micom Test, and on the next screen, look for a button labeled TMC. Press it so that it says TMC On.
Then press the GU off button twice and you will be taken back to the window showing the version.
Turn off the car, wait a minute (although if the car is new, it can be 10 minutes). After turning on the GU, it should start loading, i.e. show the logo first.

SpoilerTarget"> Spoiler: Content updater. Author yosic

• MediaNav toolbox Unleashed

This is a specially designed program that can read data collected on a USB flash drive for the native MediaNav toolbox, can generate a map update understandable by MNE (more precisely, the SyncTool.exe program) and which can be installed using standard tools like any other map update downloaded through the native MediaNav toolbox.
Attention: In order to be able to update any understandable navigation sections, as well as other necessary directories, using the standard synctool, you must first update the synctool.exe configuration file - sync_files.ini
How to collect data on a flash drive and how to install a map update, you can read in the instructions for the MediaNav toolbox or in the manual for the machine (Also see "Content Update - Official Update" above).
The program can be downloaded from this link https://drive.google.com/open?id=0B7wEhUc1319RRl9GRzFDSDhQQjA.
Unpack the downloaded archive to any place convenient for you on your computer.
Use MediaNavToolbox.exe to run the program.
Attention: Run the program only after installing the USB flash drive into the computer.
The program has the following features:

1. Updating, adding and deleting maps separately by country - Maps tab.
2. Display information about the device that navigation uses - the Device Info tab.
3. Displaying information about installed licenses - Licenses tab.
4. Ability to arbitrarily add files to and remove from MNE - Explorer tab.
   "Arbitrariness" is limited by the syctool settings "as specified in sync_files.ini, located in the Storage Card4\NNG\synctool folder on the MNE.

In the simplest case, to update the maps, you need to insert a USB flash drive with the collected information into the computer, select the folder where the new maps are located on the computer, go to the Maps tab and click “Update all my maps”.

A few videos that demonstrate the simplest ways to use the program:

1. How to choose where to get fresh maps and the easiest way to update the maps of all existing countries at once
2. How to roll back your changes if you did something wrong
3. How to add/remove/update countries individually

Attachments:

is an alternative firmware for Media-Nav and Media-Nav Evolution head unit for Renault cars, as well as for Dacia cars.

Menaco compatibility can be checked by radio type(standard head unit) and version number standard firmware of this ShGU.

OEM head unit Renault

The Menaco software package is designed for two types of Renault head units (Renault navigation): Media-Nav and Media-Nav Evolution. The installation of Menaco on the Media-Nav Evolution SHGU is different from the installation on the Media-Nav SHGU.

Menaco firmware for Renault comes in four trim levels.

The Menaco firmware is installed on the Renault Media-Nav SHGU with standard versions 4.0.2 – 4.1.0 and below.

• If the standard firmware version is 4.0.2-4.1.0, then the installation of the Menaco alternative firmware is performed without additional updates of the standard firmware.
• If the stock firmware version is lower than 4.0.2, you must first update the stock firmware to version 4.0.2 (or 4.0.5-4.0.6). Please note that the provided Menaco Installation Instructions will indicate how to properly upgrade the standard version to the required one.

Radio Media-Nav Evolution

If a version like 5.x.x, 6.x.x, 7.x.x, 8.x.x, 9.x.x is displayed, for example, 5.2.7, 5.2.7.A, 6.0.3, 8.0.5 then installed SHGU