Fur products lose their original luster and color saturation after two or three years. You can restore them with staining. You can dye artificial and natural fur at home with hair dye or special aerosols. Before the procedure, it is necessary to clean the hairs from fat and dirt. The color should be 1-2 shades darker than the original. The product is tested on an inconspicuous area first.
Dyeing natural fur
Products made of natural fur - rabbit, arctic fox, beaver, fox, silver fox, mink - every year lose their beauty and attractiveness. Some places, especially pockets and armpits, get rubbed. The product quickly loses its appearance, if a woman wears a bag with long handles, I will throw it over my shoulder.
Fur eventually fades in the sun and becomes lighter and dimmer, acquires a gray tint. In sheared products, the ends of the hairs lose their appearance after a couple of years and look scorched. Painting outerwear in specialized services is a rather expensive pleasure. procedure m Can also be done at home if you are careful and follow all the rules of painting.
How to starch a shirt at home - step by step instructions
Preparation of natural products for dyeing
First, natural fur is prepared for dyeing. It needs to be cleaned from dirt and dust. If you skip this stage, the paint on especially dirty and greasy places will be absorbed worse, and the fur will eventually be stained and streaked.
To clean products from dirt and grease, a solution is prepared:
- water - 1 liter;
- dishwashing detergent or shampoo - 1 teaspoon;
- ammonia (ammonia) - 5 g;
- salt - 15 g;
- soda - 10 g.
You can prepare a solution from improvised means:
- alcohol - 50 ml;
- vinegar 9% - 50 ml;
- water - 50 ml.
All ingredients are mixed and applied with a soft brush to the fur surface. It is necessary to control that the skin under the hairs does not get wet. Then, the foam is also gently washed off with a brush dipped in clean water. If possible, the skin on the back of the fur can be smeared with a greasy hand cream to prevent drying out.
Painting methods
Natural fur is similar in structure to human hair, so at home, professional hair dye or the one sold in supermarkets and household chemical stores is used to color it. High-quality and resistant paint will give a good effect that will remain for a long time.
When preparing a mixture for painting, it is necessary to evaluate the amount of work and the thickness of the hair. The paint needs to be diluted with a margin. For example, rabbit or mink fur is short, and silver fox, arctic fox, raccoon fur is long and dense, so twice as much paint will be required for the same area. Before staining, you need to do a test on a small inconspicuous area. This will help ensure that the right color is selected and the desired shade is obtained.
No need to try to radically change the color of a sheepskin coat or fur coat. It is better to choose a range of 2-3 tones towards a darker color. It will not be possible to dye a white fur coat black the first time, and after carrying out the dyeing process several times, you can damage the structure of the product with the chemical composition and spoil it.
The tool is applied with a brush for staining very carefully. It is necessary to paint over the fur to the roots, but at the same time try not to touch the skin. Withstand the paint from 20 to 40 minutes, focusing on the instructions in the instructions. First, the product is treated with a brush dipped in water, the main amount of the coloring composition is removed. The residue is then washed off with running water. Wash only the fur side, trying not to pour water on the skin. It is impossible to dry the product with a fan and a hair dryer. Do this in a straightened form, wiping the inner leather side dry from moisture.
Faux fur dyeing
When dyeing fake fur, you need to take into account the color of the main fabric on which it is planted. The dye is tried on a small area, staining not only the hairs, but also the base fabric. Their shades after painting may differ, the fabric or hair may not be dyed at all. Sometimes faux fur sticks together due to a reaction with the dye. That is why a test staining of a small area is carried out with the passage of all stages of staining.
Products made of faux fur (bags, fur coats) visually almost do not differ from natural products, allowing you to save on purchases. But in the process of operation, things inevitably lose their attractiveness, look faded, dull and worn out. The situation is easy to fix if the owner of the item knows how to dye faux fur at home.
How to choose paint?
Restoring your favorite thing will require some time and effort. The choice of paint is the first task that needs to be solved before starting work. To determine the color correctly, it is enough to imagine the product after dyeing and understand how you want to see it. If the owner only plans to return things to their lost beauty, shades that are as close to natural as possible are suitable for him. Whereas a radical change in color implies a careful choice of dye.
Faux fur is dyed with standard hair dye. It is important that the mixture is of high quality, provides a stable result and does not spoil the material. Tonic shampoos will help those who are going to only slightly “refresh” clothes or accessories without changing their color dramatically.
Where to start coloring?
Preparation of faux fur for dyeing begins with a thorough cleaning of the product. Traces of fat and dirt will negatively affect the result, the color will turn out to be uneven, it will not fully appear. Contaminated areas should be treated with soapy water (it is convenient to use cotton wool) the day before the procedure.
After the fur has dried, testing is required. It consists in applying paint to a small area located in inconspicuous places. If the resulting color suits you, you can proceed to work with the whole thing. So, how to dye faux fur at home?
We paint faux fur correctly
To evenly paint over each zone, it is necessary to slightly stretch the fur before applying the mixture. For convenience, you can take a wooden board, a chair, use clothespins and similar products.
When diluting paint, it is important to strictly follow the instructions; a soft brush will do as a handy tool. Coloring is carried out strictly in the direction of the hairs. In order for the base fabric to be dyed, light pressure on the brush is required.
After applying the paint, you need to wait for the expiration of the time, information about which is in the instructions. Then the faux fur product is carefully cleaned (washed with water). It is convenient to remove the remains of the dye with a clean, damp swab.
You should not wait for the material to dry before combing it, it is done immediately after staining. Next, you need to give the artificial fur time to fully dry and again walk through it with a comb, giving the fibers the necessary position. Now you can admire the result - the thing again began to look "like from a store."
It's important to know
The stretch remains until the product is completely dry, otherwise a change in its size is inevitable. A thing can not only decrease, but also stretch ugly, as a result of which it will look even worse than before work. It is far from always possible to achieve the desired color at the first staining (especially in the absence of experience). In this case, it is allowed to subject the artificial fur to this procedure again. It is only important that at least 10 days have passed since the first attempt.
You need to understand that the result depends on the degree of deterioration. Unfortunately, not all products that have been in use for a long time are subject to rehabilitation.
Over time, any fur products begin to fade. Learn how to dye fur at home and you can bring it back to its original color.
Preparing for painting
In order for the fur to be well dyed, the product must be pre-treated, having cleaned it of dirt and dust. To do this, you will need a solution of 15 g of salt, 15 g of soda, 5 g of ammonia and 7 ml of detergent. Mix all these ingredients and apply with a brush on the fur product. Rinse off any remaining solution. If the necessary ingredients were not at hand, prepare a solution of vinegar, alcohol and water (proportions 1:1:1). Treat your fur with the resulting composition, and then wipe it with a clean, damp brush.
Do not forget to treat the inside of the product before painting. To prevent deformation during operation, wipe the inside out with a greasy cream or glycerin.
Fur paint
Since natural fur is similar in structure to human hair, it is recommended to dye it with hair coloring compounds. Don't save. The higher quality and durable paint you buy, the better results you will be able to achieve. Try to choose a shade 1-2 shades darker than the existing base color. Trying to dye too light colors can give the most unexpected results, so if you want a lighter color, it's better to turn to professionals.
In order to restore the natural color of white fur that has yellowed from time to time, first lighten it before dyeing. To do this, treat the villi with hydrogen peroxide. Do not overdo the peroxide, otherwise the villi may deteriorate.
Fur dyeing
Test the paint on a small area, and if you are satisfied with the result of the test, proceed to dye the fur. Put on gloves. Dilute the paint according to the instructions on the package. Apply the composition with a brush to the entire surface, and then rub it with your hands. This will allow you to paint over the fur more evenly.
Soak the paint in accordance with the manufacturer's instructions, and then rinse with warm water and vinegar. This will consolidate the result. You can additionally give natural fur silkiness and shine. Using a brush, apply hair balm to dried fur and leave it to soak in according to the instructions. After that, thoroughly rinse the product, ridding it of non-absorbed residues of the product, and dry it again. The results of such painting will be enough for about six months, after which the procedure should be repeated.
Over time, the fur wears out, it can burn out in places, lose color saturation. But this is not a reason to send things to the trash can. After painting, they have a good chance to start a new life. Ateliers and dry cleaners may convince that old products will not withstand such exposure, or they may require a considerable amount for the procedure. We will tell you how easy and not expensive to dye fur at home.
Where to dye the fur product?
There are several options for resolving the issue of where to give the fur for painting. They differ in price and range of services offered. Before making a decision, check which ones are available in your city.
- In case of problems with clothes, it is customary to contact the studio. Things made of fur are no exception: there are special fur studios that you can contact with questions of repair and dyeing.
- Some dry cleaners not only wash clothes, but also dye fabrics and fur.
- In production, fur is dyed without fail, but on an industrial scale. Not all factories can be contacted with the question of painting an individual product.
- It is quite easy to dye the fur yourself at home.
How can fur be dyed?
Manufacturers claim that dyeing occurs according to a complex technology using dyes and oxidizing agents. In fact, this technique is almost no different from painting in a hairdresser. It turns out that fur can be successfully updated with ordinary hair dye. Indeed, in its structure, animal hair is very similar to human hair. The described method is safe for strong mezdra (skin from the inside of the pile), reliable and easy to perform. It is suitable for any kind of natural pile.
It is important to know that it is impossible to work with finished products (hats, fur coats, collars), without first opening them. This is necessary in order to have access to the mezra.
Before proceeding, you need to check the condition of the mezdra. It must be moistened with water and try to stretch. If it does not stretch or tear, you can use paint. Otherwise, it's not worth the risk. You can tint the color with a tint hair balm, following the instructions. A bright and fresh shade is as stable and long-lasting as the paint. In this way, artificial pile can be dyed, since it is not as resistant as a real one, as well as silver fox, arctic fox, rabbit, mink.
Instructions for dyeing fur at home
Since the fur is thick and long, you may need 2 packs of paint. This is especially true for Arctic fox and mink. It is better not to buy the first coloring agent that comes across, but to prefer proven brands. Having prepared the workplace, you can start painting according to a method consisting of two stages.
Stage 1 - preparation
It is necessary for cleaning from grease and dust for high-quality and uniform coloring.
- Prepare a cleaning solution: soda, salt, washing powder, a teaspoon per liter of water.
- Clean the pile with a brush.
- Rinse under warm running water.
- Leave until dry.
Stage 2 - painting
- Wear protective plastic or rubber gloves on your hands.
- Prepare the dye mixture according to the instructions.
- Before staining, it is necessary to treat the mezra with glycerin (you can replace it with any fat cream). This will keep the skin from drying out.
- Apply the mixture as quickly as possible, combing the pile in the direction of natural growth.
- Roll up and place in a plastic bag.
- By time, the paint must be kept for as long as indicated in the instructions. Compliance with the recommendations is mandatory, otherwise you risk spoiling the material.
- Rinse in warm water with any shampoo.
- Treat with any hair balm for shine and silkiness.
- Wash off all products with warm running water.
- Rinse in warm water with the addition of vinegar: 1 tablespoon per liter of water. You can use any table vinegar.
- Dry gently with a towel.
- Lubricate the mezra again with a thin layer of glycerin. Gently crush it.
The drying process should take place in natural conditions - at room temperature, without the use of heaters, hair dryers and air conditioners. Drying time can be up to 3 days depending on the length and thickness of the fur. Speeding up the process can damage the fibers.
After drying, the product may shrink. To avoid this, pin it to any hard surface with the flesh side down. For example, pushpins or sewing pins to a wooden board.
Light and red shades are difficult to paint over with any hair dye, no matter how much it costs. Therefore, you can repeat the procedure 2-3 times, especially if you want to get a rich black color.
The easiest way is in cases where you just need to enhance the tone or make it darker. In order to properly dye fox fur, which has a white or other light color, at home, it is necessary to carefully paint over the pile to the very roots and the mezra itself. You can do this with a regular toothbrush, and then comb through with a comb in different directions. It should be borne in mind that chemical exposure to the skin does not pass without a trace. To change its color with minimal risk, use a regular marker.
When painting dark things in lighter tones, you need to be prepared for an unexpected result. Of course, like hair, fur with dark pigment must first be discolored. To avoid surprises, cut off a small piece of material and work on it. You can experiment by mixing colors in different proportions to achieve the desired result.
Do not try to change the color of a whole fur coat or other large items yourself. Such a surface cannot be painted by hand evenly and quickly. The described methods are suitable for relatively small things, for example, for a fur collar on a sheepskin coat or jacket.
You don't have to worry about the color disappearing. Dyed hair retains its color even with regular contact with water and detergents for many weeks on end, and clothes get wet much less often. Guaranteed result for 7-8 months. After that, the staining procedure can be repeated. The most persistent color is red.
What if you can't use paint?
The described technique is not suitable for artificial fur, since its structure is not as strong as that of natural fur. Also, if you are afraid to damage or stain the product, the skin is weak, unreliable, or there are any other reasons to avoid chemical hair products, you can get by with canned shoe paint for suede, velor and nubuck. This method will quite cope with the masking of burnt areas. According to the instructions, the balloon must be shaken up and the substance applied from a distance of 20 cm. In order for the color to be evenly distributed over the entire surface, after application, the paint can be “smeared” with a napkin.
If you are no longer going to wear clothes with fur and do not know what to do with it, consider decorating your handbag, headphones and other accessories with stylish, bright and multi-colored fur inserts.
If you are still not sure whether to paint your product and how exactly to do it, contact the workshop and consult with experts.
After proper dyeing in compliance with all the rules and instructions, the fur will become as soft and thick as before, and it will look completely new!
In every house there are always things in the manufacture of which faux fur was used. Whether it's a bag, a collar, interior items or even a fur coat, at one point you will notice that the product has become less attractive, and the presentation is completely lost.
To revive your favorite thing, you need to make a little effort and dye or tint faux fur yourself, even at home. Before starting work, analyze how your thing looks and think about what you want to get after processing, because if you want to change the color dramatically, then you will have to tinker with the choice of dye, but if you only want to update the product, then you need to choose tones closer to the color of your product.
In any case, ordinary hair dye is used as a dye, choosing a more resistant and high-quality one. If you need to slightly refresh the product, then you can use regular tinting shampoos.
Before painting, the product must be thoroughly cleaned, any traces of dirt, grease will lead to the fact that the paint will lie unevenly, and some areas will not be tinted at all. About a day before staining, wipe the contaminated areas with a cotton swab, which you moisten in soapy water or detergent (any).
Once the faux fur is dry, find a small area that won't show up and do some testing. Color it, and after drying, see if you wanted to achieve this color. If everything suits you, then start painting the entire product.
The product itself must be slightly stretched before starting work. This is necessary so that some areas do not go unnoticed. As a stretch, you can use a chair or an ordinary wooden board, you can fix the product with clothespins.
Dilute the paint according to the manufacturer's instructions, use a soft brush when painting. All movements during operation are carried out only in the direction of the hairs of artificial fur, while lightly pressing the brush to capture the base fabric.
When painting is completed, wait for the time indicated by the manufacturer. Wash off the paint with gentle movements, try not to damage the fur. To remove excess paint, you can use a clean, damp swab.
While still wet, faux fur is combed after dyeing and left to dry, then combed again, straightening the fibers in the right direction. After drying, the product will acquire a new, bright and saturated shade.
Please note that you can remove the thing from the stretch only after the fur is completely dry, otherwise the faux fur product may change significantly in size. It can become smaller or it can simply be “pulled” in some direction.
Well, now your favorite item looks attractive again and its color is almost indistinguishable from the original color! If the shade does not suit you, after a week you can repeat the painting.
