Home Generator Training of the operator of drilling crane machines. Driver of crane-boring machines IOT ETKS operator of self-propelled drilling and crane machines

Generator

Training of the operator of drilling crane machines. Driver of crane-boring machines IOT ETKS operator of self-propelled drilling and crane machines

CRANE DRILLING MACHINE SELF-PROPELLED MACHINE

Get a worker profession now
- and get a qualification document!

About the vocational training program

Profession code: 13589
Qualifying ranks : 5-7
The purpose of training: to provide students with knowledge, skills and abilities in the formation of competence for performing labor activities as an operator of a drilling and crane self-propelled machine.
Training period: 2 weeks
Scope of the program: 80 hours, of which:
- theoretical training - 70 hours;
- training in production - 10 hours.
Language of instruction: Russian
Age: from 17 years old
Educational restrictions: absent
Place of study: you can study and receive an official qualification document regardless of where you live.
Form of study: extramural (part-time) with the use of e-learning and distance learning technologies.

The author of the program:
Program partner:

The program consists of
of 3 courses

Take courses (3) in the order shown.

Qualifying work

Complete hands-on qualification work.

Worker Profession Certificate

Get a qualification document and start working.

Go to the e-learning portal

Professional training programs ""

Training period	Professional training programs	Volume (hour.)	Form of study
Training period	Professional training programs	Volume (hour.)	correspondence *	part-time **
EDUCATIONAL PROGRAMS PROFESSIONAL TRAINING
2 weeks	Self-propelled drilling and crane operator (previously did not have a working profession)***	80
EDUCATIONAL PROGRAMS Retraining
2 weeks	Self-propelled drilling and crane operator (having any working profession)***	80
EDUCATIONAL PROGRAMS ADVANCED QUALIFICATIONS
2 weeks	Self-propelled drilling and crane operator (raising the qualification category to 6, 7)	80

*** PAY YOUR ATTENTION! If you do not have any profession of a worker, do not have a document on vocational education or vocational training, then you need to undergo training in a vocational training program. If you previously acquired a profession or received a professional education, then you need to undergo training under a professional retraining program. Affects the duration and cost of training!

If you need to obtain a license of a tractor driver-driver (UTM), at your request, you can take the state exam both at your own inspection Gostekhnadzor and in Yaroslavl.
* Extramural studies- for citizens of any constituent entity of the Russian Federation (training using e-learning and distance learning technologies).
** Part-time education- for citizens living in the city of Yaroslavl and the Yaroslavl region and citizens who have decided to take the Gostekhnadzor exam in the Yaroslavl region.

Professional training program - training of persons who did not previously have the profession of a worker.
Retraining program- training of persons who already have the profession of a worker (tractor driver, loader driver, bulldozer driver, all-terrain vehicle driver, motor grader driver, etc.).
Professional development program- training of persons who already have the profession of a worker, in order to consistently improve professional knowledge, skills and abilities in the existing profession.

QUALIFICATION GRADES

Qualification characteristics in accordance with: Unified tariff and qualification reference book of jobs and professions of workers (ETKS). Issue No. 3 Approved by Order of the Ministry of Health and Social Development of the Russian Federation of April 6, 2007 N 243 (as amended by: Orders of the Ministry of Health and Social Development of the Russian Federation of November 28, 2008 N 679, of April 30, 2009 N 233).

5th grade - self-propelled drilling and crane machines with drilling depth up to 6 m.
6th grade- self-propelled drilling and crane machines with drilling depthover 6 m.
7th grade- burine-crane self-propelled machines with engine with a capacity of 100 - 180 hp. atdrilling diameter over 400 to 1200 mm.

Description of the work. Management of machines used for driving and driving piles during the construction of pile foundations, sheet piles, quay fences, retaining walls and other similar structures. Maintenance of machines, checking the health of systems and assemblies. Identification and elimination of malfunctions in the operation of machines. Participation in scheduled preventive maintenance. Refueling with fuels and lubricants.
Must know: arrangement of serviced machines, rules and instructions for their operation; methods of production of the work performed and technical requirements for the quality of the work performed; consumption rates of fuels and lubricants; grades and properties of oils and fuels, their technological characteristics, rules for safe storage.

DOCUMENT CONFIRMING YOUR QUALIFICATION

Certificate of completion of training for the inspection of Gostekhnadzor.

Qualification document for employment.

After completing the educational program, the student receives a qualification document - a certificate of the worker's profession.
A worker's profession certificate confirms the assignment of a category based on the results of vocational training. The qualification indicated in the qualification document gives its holder the right to engage in certain professional activities or perform specific labor functions (Clause 11, Article 60 of the Law on Education in the Russian Federation of December 29, 2012 No. 273-FZ).

MINISTRY
EDUCATION AND SCIENCE
RUSSIAN FEDERATION

MACHINIST COPRA

Get a worker profession now
- and get a qualification document!

category "C" - wheeled vehicles with an engine power from 25.7 to 110.3 kW
category "D"- wheeled vehicles with an engine power of over 110.3 kW
category "E"- tracked vehicles with an engine power over 25.7 kW

IMPORTANT! If the corresponding categories for the right to drive self-propelled machines are open in the tractor driver's license - The inspector of the state technical supervision does not need to pass the exam... When you contact the inspectorate of state technical supervision, you will be entered qualifications in the section "Special marks" no exam.

The name of the base group, position (profession) or specialty: pile driver
copra operator
vibrator driver

About the vocational training program

Profession code: 13783
Qualifying ranks : 5-7
The purpose of training: to provide students with knowledge, skills and abilities in the formation of competence for performing mechanized work on driving and driving piles and every shift, periodic maintenance of vibration-pressing pile drivers.
Training period: 2 weeks.
Scope of the program: 80 hours, of which:
- theoretical training - 70 hours;
- training in production - 10 hours.
Language of instruction : Russian
Age: from 17 years old
Educational restrictions: absent
Place of study: you can study and receive an official qualification document regardless of where you live.
Form of study: extramural (part-time) with the use of e-learning and distance learning technologies.

Professional training programs "COPRA MACHINIST"

Training period	Professional training programs	Volume (hour.)	Form of study
Training period	Professional training programs	Volume (hour.)	correspondence *	part-time **
EDUCATIONAL PROGRAMS PROFESSIONAL TRAINING
2 weeks	Pile driver (previously did not have a working profession)***	80
EDUCATIONAL PROGRAMS Retraining
2 weeks	Pile driver (having any working profession)***	80
EDUCATIONAL PROGRAMS ADVANCED QUALIFICATIONS
2 weeks	Bar installation operator (raising the qualification category to 6, 7)	80

*** PAY YOUR ATTENTION! If you do not have any profession of a worker, do not have a document on vocational education or vocational training, then you need to undergo training under the program of vocational preparation... If you previously acquired a profession or received a professional education, then you need to undergo training, according to a professional retraining... Affects the cost of training!

* Extramural studies- for citizens of any constituent entity of the Russian Federation (training using e-learning and distance learning technologies).
** Part-time education- for citizens living in the city of Yaroslavl and the Yaroslavl region and citizens who have decided to take the Gostekhnadzor exam in the Yaroslavl region.

Cost of training for the category of self-propelled vehicles

Self-propelled vehicles category		Cost, rub.
V	tracked and wheeled vehicles with an engine power up to 25.7 kW	3500
WITH	wheeled vehicles with an engine power from 25.7 to 110.3 kW	3500
D	wheeled vehicles with engine power over 110.3 kW	3500
E	tracked vehicles with an engine of over 25.7 kW	8000

1 kilowatt (kW) kW = 1.3596 horsepower (hp)

QUALIFICATION GRADES

Qualification characteristics in accordance with: Unified tariff and qualification reference book of jobs and professions of workers (ETKS). Issue No. 3 Approved by the Order of the Ministry of Health and Social Development of the Russian Federation of April 6, 2007 N 243 (as amended by: Orders of the Ministry of Health and Social Development of the Russian Federation of November 28, 2008 N 679, of April 30, 2009 N 233)

5th grade - copra (simple land)
6th grade- pile drivers (universal, pile-cranes, floating pile drivers, non-self-propelled)
7th grade- copra (self-propelled installations)

Machine operator for drilling wells, driving and driving piles
Description of the work. Control of machines of various types used for driving and driving piles when installing pile foundations, sheet piles, quay fences, retaining walls and other similar structures. Maintenance of machines, checking the health of systems and assemblies. Identification and elimination of malfunctions in the operation of machines. Participation in scheduled preventive maintenance. Refueling with fuels and lubricants.
Must know: arrangement of serviced machines, rules and instructions for their operation; methods of production of the work performed and technical requirements for the quality of the work performed; consumption rates of fuels and lubricants; grades and properties of oils and fuels, their technological characteristics, rules for safe storage.

DOCUMENT CONFIRMING YOUR QUALIFICATION

We give out two documents:

Certificate of completion of training for the inspection of Gostekhnadzor.

Qualification document for employment.

DOCUMENT CONFIRMING THE RIGHT TO DRIVE SELF-PROPELLED VEHICLES

After completing the educational program, the student receives a qualification document - a certificate of the worker's profession.
A worker's profession certificate confirms the assignment of a category based on the results of vocational training. The qualification indicated in the qualification document gives its holder the right to engage in certain professional activities or perform specific labor functions ( paragraph 11, article 60 of the Law on Education in the Russian Federation of December 29, 2012 No. 273-FZ).

The qualification document gives the right to apply to the inspectorate of the state technical supervision for the provision of state services for taking exams for the right to drive self-propelled vehicles and issue a certificate of a tractor driver (tractor driver).

MINISTRY
EDUCATION AND SCIENCE
RUSSIAN FEDERATION

Approved by the Order of the Ministry of Health and Social Development of the Russian Federation of 06.04.2007 N 243
(as amended by: Orders of the Ministry of Health and Social Development of the Russian Federation of November 28, 2008 N 679, of April 30, 2009 N 233)

Machine operator for drilling wells, driving and driving piles

Description of works... Driving machines of various types specified in §§ 128 - 130, used for driving and driving piles when installing pile foundations, sheet piles, quay fences, retaining walls and other similar structures. Maintenance of machines, checking the health of systems and assemblies. Identification and elimination of malfunctions in the operation of machines. Participation in scheduled preventive maintenance. Refueling with fuels and lubricants.

Must know: arrangement of serviced machines, rules and instructions for their operation; methods of production of the work performed and technical requirements for the quality of the work performed; consumption rates of fuels and lubricants; grades and properties of oils and fuels, their technological characteristics, rules for safe storage.

§ 128. Engine driver of the 5th category

Self-propelled drilling and crane machines with a drilling depth of up to 6 m.

Self-propelled vibratory pile drivers with an engine power up to 73 kW (100 hp).

Vibrators are cordless.

Diesel hammers are cordless.

Copra (simple land).

§ 129. Engine driver of the 6th category

Self-propelled drilling and crane machines with a drilling depth of over 6 m.

Self-propelled vibrating pile drivers with an engine power of over 73 kW (100 hp).

Copra (universal, cranes, floating, non-self-propelled copra).

§ 130. Engine driver of the 7th category

Self-propelled drilling and crane machines with a 100 - 180 hp engine. with a drilling diameter of over 400 to 1200 mm.

Copra (self-propelled units).

Secondary vocational education is required.

Tariff and qualification characteristics of the profession "Copra driver" are required to determine the types of work, the tariff rate and the assignment of ranks in accordance with the Russian Federation.

Based on the specified characteristics of the work performed and the requirements for professional knowledge and skills, a job description of a copra driver is drawn up, as well as personnel documents, including for interviewing and testing when hiring.

When drawing up work (job) instructions, it is necessary to take into account the general provisions and recommendations for the release, if the information is not enough, refer to the search for a profession through alphabetical order.

Pile driver

Description of works... Management of machines and mechanisms used in the performance of construction, installation and repair and construction works, including those used for driving and driving piles when installing pile foundations, sheet piles, quay fences, retaining walls and other similar structures. Maintenance of machines, checking the health of systems and assemblies. Identification and elimination of malfunctions in the operation of machines. Participation in scheduled preventive maintenance. Refueling with fuels and lubricants.

Must know: arrangement of machines (mechanisms), rules and instructions for their operation, maintenance and preventive repair; traffic rules when working with vehicles on a motor vehicle; methods of performing work with the help of appropriate machines; technical requirements for the quality of work performed, materials and elements of structures; consumption rates of fuels and lubricants and electricity; plumbing in the amount provided for a construction locksmith, but one category below the category of a machinist.

5th grade- copra (simple land)
6th grade- pile drivers (universal, pile-cranes, floating pile drivers, non-self-propelled)
7th grade- copra (self-propelled installations)

Russian Federation Samples of documents and reporting forms

Production instruction for the operator of the self-propelled drilling and crane machine

set a bookmark

This production instruction for the driver of a self-propelled drilling and crane machine has been developed in accordance with ETKS 3 § 129, Intersectoral rules for labor protection during the operation of industrial transport (floor trackless wheeled vehicles), Safety rules for the construction of underground structures. PB-03-428-02.

1. GENERAL REQUIREMENTS

1.1. The driver of a self-propelled drilling-crane machine is a worker and reports directly to the foreman of the transport section.

1.2. The operator of the self-propelled drilling-crane machine must fulfill his duties in accordance with the requirements of this Instruction.

1.3. The operator of a self-propelled drilling and crane machine should know:

the device of the serviced machines, the principle of operation, the technical characteristics of the machine;

rules for drilling holes for supports and poles;

rules for installing supports, pillars, etc. using a crane or machine;

rules and instructions for operation, maintenance and repair of the machine, performance of lifting work during the installation of supports, poles, etc.;

causes of occurrence, methods of manifestation and elimination of malfunctions;

lubrication modes; consumption rates of fuels and lubricants;

methods of production of the work performed and technical requirements for the quality of the work performed;

grades and properties of oils and fuels, their technological characteristics, rules for safe storage;

sign alarm.

1.4. In his activities, the driver of a self-propelled drilling-crane machine is guided by:

the current legislation of the Russian Federation;

The charter of the enterprise;

internal labor regulations;

rules of personal hygiene and industrial sanitation;

safety rules and fire prevention measures;

the basics of labor legislation;

these production instructions.

1.5. The driver of a self-propelled drilling-crane machine is appointed and dismissed by order of the head of the institution in accordance with the current legislation of the Russian Federation.

1.6. The driver of a self-propelled drilling-crane machine is a person who is at least 18 years old, has been trained in the prescribed manner and has a certificate of a car lift driver, has passed a medical examination, and has a qualification group for electrical safety of at least II.

1.7. The re-examination of the knowledge of the operators of the self-propelled drilling-crane machine is carried out by the qualification commission of the enterprise:

periodically, at least once every 12 months;

when moving from one place of work to another;

at the request of an engineer and technical worker for supervision over the safe operation of a self-propelled drilling-crane machine in an organization.

1.8. The operator of the self-propelled drilling-crane machine is provided with overalls and footwear in accordance with the current regulations.

1.9. The operator of a self-propelled drilling and crane machine must know and strictly observe the requirements for labor protection, fire safety, industrial sanitation.

1.10. The operator of a self-propelled drilling and crane machine must:

comply with the internal labor regulations and the established work and rest schedule;

to perform work that is part of his duties or entrusted by the administration, provided that he is trained in the rules for the safe performance of this work;

apply safe work practices;

be able to provide first aid to victims.

2. OBLIGATIONS

Before starting work, the driver of a self-propelled drilling-crane machine must:

2.1. Check the technical condition of the self-propelled drilling-crane machine:

serviceability of tires, brakes, steering, propeller shaft mounting bolts, serviceability of wiring, headlights, brake lights, direction indicators, sound signals, instrumentation, rear-view mirrors;

carry out maintenance and refuel the car with fuel, oil, water, antifreeze (in the cold season) and brake fluid, check the electrolyte level in the battery;

check the engine idling and its serviceability, as well as lighting and instrumentation and steering.

2.2. In the course of daily activities, the driver must:

to use in the process of work machines and mechanisms for their intended purpose, in accordance with the instructions of the manufacturers;

maintain order at workplaces, clean them of debris, snow, ice, prevent violations of the rules for storing materials and structures.

2.3. If, during the inspection and testing of the self-propelled drilling-crane machine, malfunctions or deficiencies in its condition that impede safe operation are found, and it is impossible to eliminate them on his own, the driver, without starting to work, must report this to the specialist responsible for maintaining the machine in good condition.

2.4. The operator of the self-propelled drilling and crane machine is prohibited from starting work in the following cases:

malfunctions of mechanisms and systems in which the operation of the base vehicle is prohibited;

the presence of cracks and deformations in metal structures;

malfunctions of pressure gauges in the hydraulic drive system;

manometers should be tested and sealed;

untimely carrying out of the next tests (technical inspection) of the machine.

2.5. During work, the driver of a self-propelled drilling-crane machine must:

in the security zone of underground communications, work should be carried out under the direct supervision of the work manager, and in the security zone of a gas pipeline or cables that are under electrical voltage, in addition, under the supervision of an employee of a gas or electric facility, respectively;

work in the security zone of the overhead power line is allowed only if there is a work permit and under the supervision of the work manager and the representative of the owner of the power transmission line;

while refueling the car with fuel, the driver and other persons who are near the car are prohibited from smoking and using open fire;

during maintenance, the driver is obliged to stop the engine and relieve the pressure in the hydraulic system, if this is allowed by the manufacturer's instructions for operating this machine;

before starting maneuvering, the driver must make sure that there are no people at a distance of at least 5 m from the operating area of the machine and its working bodies;

give a warning signal;

Before installing the machine at the place of work, check the compliance with labor protection requirements:

the soil on the path of the machine should be planned and tamped, inventory pads should be placed under the outriggers;

the area where the vehicle is located must be sufficient for its maneuvering;

the slope of the site should not exceed the allowable one according to the passport of the car;

when installing the machine over existing communications, it is necessary to first lay reinforced concrete road slabs;

when moving to another place, raise the working body and lower the mast to the transport position;

when relocating the car in tow, the driver must be in the cab of the car and comply with the requirements of the traffic rules;

work in areas with pathogenic soil contamination (landfills, cattle burial grounds, cemeteries) should be carried out with the permission of the state sanitary supervision authorities.

2.6. During work, the driver of the self-propelled drilling and crane machine is prohibited from:

leave the control levers of the drilling and crane unit with the engine running;

change abruptly the engine speed, as well as the pressure in the hydraulic system;

remove the protective cover on the clutch or winch drum;

include a drill with an unpinned pin of its attachment or with not fully fixed knives on the drill;

turn on the winch while drilling the soil;

release the machine when drilling soil or installing supports;

operate the machine if the winch safety clutch is not adjusted to the lifting capacity specified in its passport;

maintain the machine, including cleaning or lubricating its individual parts;

transfer control of the machine to unauthorized persons;

to transport unauthorized persons in the cab of the car;

allow workers who are not certified as slingers to be slinged.

2.7. When installing poles for various purposes in drilled holes, including overhead power lines, telephone and telegraph communication lines, road signs and others using a drilling and crane machine, the driver is prohibited from:

pull up poles that are more than 3 m from the center of the pit;

lift poles with an unregulated safety clutch, which must be adjusted to the carrying capacity of the machine according to its passport and sealed;

move with a raised post even for short distances;

install poles without the help of an auxiliary working body;

allow the presence of people in the danger zone arising from the movement of the poles.

2.8. After finishing work, the driver of the self-propelled drilling-crane machine must:

drive the car to the parking lot, where it should be outside of working hours;

turn off the engine;

close the cockpit with a lock.

3. LIABILITY

The operator of the self-propelled drilling and crane machine is responsible for:

3.1. Timely and high-quality implementation of the duties assigned to him.

3.2. Organization of their work, timely and qualified execution of orders, orders and instructions of the management, regulatory legal acts for their activities.

3.3. Compliance with internal regulations, fire safety and safety regulations.

3.4. Maintaining the documentation provided for by the current regulatory legal acts.

3.5. Prompt adoption of measures, including timely notification of the management, to eliminate violations of safety regulations, fire safety and other rules that pose a threat to the activities of the institution, its employees and other persons.

3.6. For violation of labor discipline, legislative and regulatory legal acts, the driver of a self-propelled drilling-crane machine may be brought to disciplinary, material, administrative and criminal liability in accordance with the current legislation, depending on the severity of the offense.

4. RIGHTS

The operator of a self-propelled drilling and crane machine has the right to:

4.1. Give instructions to subordinate employees, assignments on a range of issues included in his functional duties.

4.2. Monitor the execution of production tasks, the timely execution of individual orders by employees subordinate to him.

4.3. Request and receive the necessary materials and documents related to the issues of their activities.

4.4. Interact with other services of the enterprise on production and other issues within its functional responsibilities.

4.5. To get acquainted with the projects of decisions of the management of the enterprise concerning the activities of the unit.

4.6. Submit proposals for improving the work related to the responsibilities provided for in this instruction for consideration by the head.

5. FINAL PROVISIONS

5.1. The employee is familiarized with this instruction when hiring (transferring) to work in the profession for which the instruction has been developed.

5.2. The fact that the employee is familiar with this instruction is confirmed by a signature on the acquaintance sheet, which is an integral part of the instruction kept by the employer.