What wheels are on Nissan Almer. Wheels and tires on the new Nissan Almer. Almera Classic Wheel Characteristics

Wheel selection for Nissan Almera will not cause difficulties. It is necessary to know the basic parameters of the tire indicated on its sidewall. Discs should also correspond to the selected rubber and the Almera hub. Tabolovka, and the diameter of the center hole - the main parameters of the disk. The drill is a way to do holes, not the characteristic

Knowing these sizes, easy to choose the wheels. In the material you will find the power of the tightening of the nuts, the pumping pressure of the wheels of the Nissan Almer.

Almer N15 on disks

Nisan Almera Generation N15 1995-2000 - has a number of identical disk parameters, tires for gasoline hatchbacks, sedans 1.4 and 1.6 l with a capacity of 87, 99 hp Accordingly, as well as with diesel engines 2.0 l with a capacity of 75 hp

Unchanging values:

• diameter of the central opening -59.1 mm
• type of fasteners - nut
• tightening torque: 98 - 118 NM
• fastener size -m12 x 1.25
• tire pressure - 2.1-2.3 kg / cm²
• the moment of the force of the attachment is 98-118 N / m.

Almera N15 tire size range:

• diameter in inches - 13-15.
• width in MM -175 - 195
• profile (%): 55 - 70.

The smallest tires - 175/70R13, and 195/55R15 the largest.

Almer N15 discs:

• tool or drilling -4x100
• diameter in inches - 13-15
• width in inches -5-6
• departure ET in mm - 35-40.

Tires, discs for Almera N16

Part of the sizes of the wheels of Almera N16 coincide. The same for everyone will be:

• DIA - the diameter of the center opening 6 6.1 mm
• fastening the nut and the size of the fasteners of the hub - M12x1,25
• tightening torque of nuts - 98nm
• tire pressure - 2.1-2.3 bar
• PCD (breakdown) - 4 × 114 ,.3.

Almer N16 on disks

Tire size range:

• diameter -14.0 - 17.0
• width in mm - 175 - 215
• tire profile (%): 45 - 75.

Marking the smallest tire for Almert N16 - 175 / 75R14, and the largest - 215 / 45R17.

• diameter in inches - 14 - 17
• width in inches - 5 - 7
• departure ET - 35-45 mm.

Almera Classic Wheel Characteristics

Almer Classic on disks

Drying (PCD), the diameter of the central hole (DIA), the size of the fastener is the same as for Almer N16.

The moment of tightening force of nuts - 90 nm, pump pressure 2-2.2 bar, departure ET in the range of 35-40 mm.

Sizes of tires and discs Almer Classic 2006-2012:

• 175/70R14 88H - 5JX14ET35 ET 24-45
• 185/65R15 88H - 6JX15ET40
• 185/70R14 - 5,5JX15ET35 and 6J15ET35
• 195/60R15 - 6JX15ET40
• 205/50R16 - 6,5JX16ET40
• 205/50R16 -7J X16ET35

Almera G15 Wheel Parameters

Common parameters:

• tool -4 x 100
• diameter of the central hole (DIA) -60.1 mm
• pressure - 2.0-2.2 (Compare with manual)
• fastening - m 12 x 1.25
• departure ET - 40

Almer G15 on disks

Sizes of tires and disks:

• 175/70R14 - 5,5J14ET40
• 185/65R15 - 5,56J15ET40

Sizes of tires and disks Almera Tino

Through Almer Tino (PCD) - 5x114.3, the diameter of the central hole (DIA) is 66.1 mm, the fastening of the nut is the carving of the M12x1.25, the tightening torque is 100 nm.

Almer Tino on disks

Tire marking:

• diameter in inches - 15, 16 and 17,
• profile width in mm - 185, 195, 205, 225
• profile height in% - 45 - 65.

Details about breaking (drilling) and other disk characteristics and tires

The breakdown is denoted by PCD - the number of holes for the hub studs and the diameter of the mounting centers.

Disc Characteristics

Diameter of the central opening - Dia. Must coincide with the size of the hub.

Departure Wheel ET is distrust between the central axis of symmetry and the plane of the mounting surface of the mount.

Decoding disc marking 6.5JX16 ET45:

• 6.5 - the landing width of the rim in inches, to translate to millimeters multiply by 2.54
• J - configuration or form
• X - x-factor, casting, stamping
• 16 - planting diameter
• ET45 - Positive wheel departure 45 mm.

The designation of seasonal accessories has no summer rubber. Winter tire is marked with M + S, the symbol of the snowflake or the word Winter is applied. All-season rubber is marked as a winter tire, but sometimes an inscription is applied: as, r + w, aw. On the sidewall of the tires, the four-digit number will indicate the year of release - 0418 means: 04 - Number of weeks (January), 18 - 2018.

Decoding Tire marking 205/65 R16 94S:

• 205 - profile width in mm
• 65 - profile height as a percentage of width
• R - Radial Tire
• 16 - planting diameter in inches
• 94 - Load Index
• S - Speed \u200b\u200bIndex.

Good disk manufacturers

Russian companies:

• K & K - joint production, letters - abbreviated names of companies: Krams Russia and Commos Germany.
• Ifree - releases alloy wheels, differ in excellent quality and low price, available for cars of foreign and Russian brands.
• NEOWHELL - production at the Azitek plant, founded by the Indian Corporation. The product has certification of compliance with international ISO standards.
• SKAD - Based in Russia. Quality is not doubtful, products are shipped for Ford, Volkswagen.

Best Foreign Manufacturers:

• OZ Group, MOMO - Italian brands.
• NS - Asian manufacturer. ISO certified products. Covers a wide range.
• Nitro, Replica - leading Chinese manufacturers, largest disc suppliers in the Asian region. We are in demand. Enclose sizes of models of machines manufactured for the global market.
• AEZ - Alcar German Holding. Delivers cast, stamped, forged and two-stamped car rollers with chrome and lacquered coating.

Manufacturers of good and not expensive tires

Sava tires are produced at different factories in Europe. The company specializes in the release of not expensive summer and winter tires for passenger cars.

Tire sizes

2.01.2018

From the right selection of wheel drives, seasonality and state of tires depends on the safety of the vehicle during the movement. Alas, but as practice shows, most even experienced motorists belong to this not always seriously. What wheels to put on Nissan Almera? Since this question is considered the car most frequently asked on the forums, we will try to answer the most informatively to it.

The main parameters of any wheel disc is considered its dimensions and the magnitude of the maximum permissible load. All these values \u200b\u200bare specified in the car's operational book, or directly on the wheelbase installed by the manufacturer.

Such must be almers G15. Where is Logan?

Selection of discs to Almer different modifications (N16, Classic, G15)

On the Internet you can find enough information about the selection of disks and tires for various modifications of the almer. However, many owners still can not fully understand: how to choose whether to choose discs and rubber on the car? First you need to plunge into the history of this vehicle. The prototype of Nissan Almera G15 was the Japanese Bologda, the basic equipment of which was produced with the rubber parameters 195/65/15. Since then, the chassis of this car has not changed much, and the tires with such values \u200b\u200bcan be safely installed on modern modifications of almers. For example, on the G15 models, the standard tires with parameters 185/65/15 are well practicing, however, they have proven themselves worse on budget versions. As part of the publication, we will not call companies that produce tires. They are all known to everyone. Let's just say one thing: a good tire should work out on average 5-6 seasons, although it depends on the road surface and driving manner. This is verified in practice. The Rubber of the Amtel company, which often from the factory is established on budget nonissans, does not always meet the high requirements. This does not mean that it is bad, and the dimension of the disks is not suitable for it.

One of the common sizes is considered to be 205/55/16. Tires with such parameters can also be installed. But, here it is necessary to take into account the dimension of the disks, which should have the following designation 7.0 JJ PCD 4x100 DIA 60.1 minimum departure 43 or it can be reduced to 38. With a greater dimension, the protector may touch the wheel arch. With a large magnitude of the departure, the wheel is deeper in the arc, and not the opposite.

Tuners Almers love nismo discs, they are suitable as relatives, and look cool

The main indexes in the designations of wheels:

• PCD 4x100 is the designation of the timber disk (4 bolts located on the circle with a diameter of 100 mm);
• Em - departure disk;
• Jj - disk width;
• H91 is the maximum speed and permissible mass (the index H \u003d 210 km / h, the amount of 91 is denoted by the maximum value of which is 615 kg);
• R is the tire diameter (this parameter must necessarily be equal to the disk diameter);
• Tubeless - "Dogless";
• W (Winter) - Tire for winter;
• DIA is the diameter of the hub hole. Note that on some forged discs, its value differs in the biggest side. In such a case, special centering inserts are provided that will help prevent wheel beatings at high speeds.

Main dimensions of Nissan Almera discs: R15 4 × 100 ET35-45 J6.5, R15 4 × 100 ET35-45 J6, R16 4 × 100 ET35-45 J7, R17 4 × 100 ET35-45 J7. Under these disks dimensions, rubber are suitable with the following parameters: R14 175/70, R15 185/65, R15 195/60, R16 195/55.

Discover discs

The factory breaking of the wheel drives G15 has a 4/100 formula or 4x100. There are cases when car owners specifically change this parameter (for example, when). However, such a measure is not always justified, given the fact that in this case the initial structural parameters set by the manufacturer varies.

Dissollet Nissan Almera 4 * 100

It is important to choose a disk with suitable breaks. This is necessary for the proper centering of the wheel. Note that it is allowed to install a disc, the diameter of the fastening circle of which differs from the value installed by the manufacturer to several millimeters to a large or smaller side. In this case, the car owner acts as they say: at their own risk. Wrong breakdown is the cause of the wheel centering disorders, which can later lead to serious problems, up to spontaneous unscrewing bolts at speed. In addition, vibrations can be felt during a ride. And the more inconsistency, the greater discomfort from the movement is felt all those present in the vehicle cabin.

Selection of winter tires on Nissan Almera

Many owners prefer not to focus on tire seasonality. Most likely, for considerations of savings, they simply buy all-season rubber, sometimes not always satisfactory quality. However, its use is largely justified only in regions with a mild climate and warm winters.

As for the winter ride, it is recommended to acquire only high-quality Nissan Almera tires, which are made of durable and soft rubber. If on summer tires somehow can be saved, then you should not do on tires for winter. Why do you need to purchase only high-quality corporate winter tires? Only such products differ in its composition: due to the presence of a large amount of synthetic rubber, the tread protector at any, even extremely low temperatures remains plastic, providing excellent adhesion with any winter road coating.

The fundamental factor in the selection of winter tires is not the presence of the "W" literature on the side of the tire, and not the manufacturer (in conditions of tough competition, everyone is trying to keep the brand), and a clearly pronounced pattern of the tread, which happens two types:

1. Scandinavian
2. European

They differ in the depth of grooves and checkers on the tread plane. The Scandinavian type has deep grooves in the picture and is more adapted for driving on snow-covered roads. European - on the contrary, is distinguished by a less pronounced pattern and is designed more for the movement of icy highways. In addition, manufacturers produce tires with a versatile pattern of a tread, which works well both on snow-covered and icing winter roads.

Differences of the untouched winter and summer tires

In the regions with a great predominance of icy roads, it is recommended to install on the car of special winter studded tires with a universal tread pattern. Such rubber is sold both in a ready version of execution (with spikes installed) and the possibility of their independent installation. High-quality, soft, studded tires significantly increase the handling of the vehicle on garpless and snow-covered highways, making driving comfortable and safe.

Using automatic selection of tires and discs for the car Nissan Almera.A variety of problems associated with their compatibility and compliance with the recommendations of automakers can be avoided. After all, they turn out to be a huge impact on a significant part of the operational properties of the vehicle, primarily on handling, fuel efficiency and dynamic qualities. In addition, it is impossible not to note the importance of tires and wheeled disks, as elements of active safety. That is why the choice between them should be made as responsible as possible, which implies the presence of a number of knowledge about these products.

Unfortunately, most car owners prefers not to go into such technical nuances. Regardless of this, the automatic selection system will be extremely useful, i.e. it allows you to minimize the likelihood of making an incorrect solution when choosing certain tires and wheels. And choose from anything, thanks to the widest assortment of such products presented in the Mosavtranshina online store.

Selection of tires and discs for the car Nissan Almera 1.8i II (N16) 2005 Reduces the risk of problems due to errors made by car owners in their independent choice. As a rule, this is due to the lack of relevant knowledge about a number of parameters that must be taken into account. It is for this reason that during the installation of tires and wheels there are various difficulties, and in addition, there are many suspension and steering units of the suspension and steering. Online store "Mosavodina" uses an automated selection system of wheelcases and tires, which is based on a special database. It contains various technical information on the overwhelming majority of modern passenger and trucks. All of its numerous advantages will become available after the user specifies the brand, model, year of release and the modification of its vehicle.

To ride the car, it is safe, you must properly select tires and discs. Unfortunately, very many car enthusiasts fit this question is not very serious. But from the size of the wheel depends on the work of the suspension, the dynamics of the machine and comfort when traveling.

Nissan Almera.

The car is a prototype of the Japanese Blubord. It was produced from the plant with Tires 195/65/15. For all the years of manufacture, the chassis was not subject to any changes, so the wheels with such parameters are suitable for the latest almera modifications.

Nissan Almera G15 is excellent tires 185/65/15. For a budget option, it is better to put other models. The most common - 205/55/16. However, when installing, you must consider the size of the disks.

It should be marked 7.0 JJ PCD 4x100 Dia 60.1. At the same time, the minimum departure must be in the ETT range 38. Et 43. If you set too large, it is possible to hide the wheel arches with the tread. When the departure is enlarged, the wheel is deeper into the wheeled arch.

Nissan X-Trail

In different years, the car was produced with various configuration. In addition to the engine, the appearance and interior of the cabin, the size of the wheels also changed. The car released in 2001-2006 was equipped with tires 215/65 R16. The tires sat on the discs having a breakdown of 5x114.3, the diameter of the central opening 66.1. The departure was equal to 40.

On second generation cars, released in 2007-2010, the manufacturer recommends installing tires:

The third generation of Nissan X-Trail cars began to produce in 2011. All subsequent rules of the machine are equipped with the same wheels. Manufacturers recommend installing tires and wheels of the following dimensions:

Nissan Teana.

The car refers to the business class. From the factory, it is produced with alloy discs of 16-18 inches. Main settings:

• Breakdown - 5x114,3,
• Width - 6.5-8.0j,
• Will fly 40-47,
• The central diameter is 66.1.

All these sizes are selected depending on the configuration of the machine. Standard:

• 215/60 / R16,
• 215/55 / \u200b\u200bR17,
• 235/45 / R18.

Some drivers are installed R18 tires. For them, the parameters 225/45 R18 are ideal. The most suitable discs:

• Breakdown - 5x114,3,
• Width - 6.5-7.5j,
• Will fly 45-50,
• The diameter of the central opening is 66.1.

Other generations of Teamena are equipped with similar tires with the same discs.

Nissan Almera Classic

The manufacture of the car began in 2006. All subsequent models were completed with the same wheels. The only difference could only be the volume of DVS. Today the machine is equipped with 1.6 B10 Sedan engine.